Network

Online Traceroute Tool

Hop-by-hop path from our server to your target with latency per hop — find where packets slow down or get dropped.

About Traceroute

Maps the hop-by-hop network path from our server to a target host, showing every router along the way and the latency at each hop. When a connection is slow or failing, traceroute shows where in the path the problem actually is. Not every hop will respond — some routers are configured not to reply to traceroute probes, which shows as a timeout rather than a failure and is normal, not necessarily a sign of a problem.

This only shows the path in one direction, from our server to the target — the reverse path taken by response traffic can differ (asymmetric routing is common on the internet), so a problem on the way back won't necessarily show up here.

📖 Read more in our Knowledge Base →

How traceroute works

Every IP packet carries a TTL (hop limit). Each router decreases it by one and drops the packet when it reaches zero, sending back an "ICMP time exceeded" message. Traceroute sends probes with TTL 1, 2, 3 and so on, and each router that drops a probe reveals its address and the round-trip time to it. The result is the list of routers between our server and the target.

Reading the output

  • Rising latency that stays high: look at the hop where the jump starts. A jump at an ocean crossing is distance, not a fault.
  • A spike at one hop that disappears later: that router answers traceroute probes slowly because it handles them in software at low priority. Traffic passing through it is not delayed.
  • * * * rows: the router does not answer probes. Harmless if later hops answer.
  • Stars from some hop to the end: either the target's firewall drops the probes or the path really breaks there. Test the service itself before concluding.

Traceroute vs MTR

Traceroute is a single snapshot. For intermittent problems, use MTR, which repeats the probes and shows loss and latency statistics per hop. For a quick reachability check, ping is enough. To see who owns a hop address, look it up in the IP Lookup or ASN Lookup.

Running it yourself

  • Windows: tracert example.com (ICMP).
  • macOS / Linux: traceroute example.com (UDP by default); add -I for ICMP or -T -p 443 for TCP to get through firewalls that drop UDP.

Enter a hostname or an IPv4 address.